Media Hub - Playing Ipod/Usb/Mp3 Devices; Usb Port - Jeep RENEGADE 2016 User Manual

Hide thumbs Also See for RENEGADE 2016:
Table of Contents

Advertisement

MEDIA HUB – PLAYING iPod/USB/MP3 DEVICES
There are many ways to play music from iPod/MP3 players or USB devices through
your vehicle's sound system.
Audio Jack (AUX)
The AUX allows a portable device, such
as an MP3 player or an iPod, to be
plugged into the radio and utilize the
vehicle's sound system, using a 3.5 mm
audio cable, to amplify the source and
play through the vehicle speakers.
• Press the MEDIA button, press "Se-
lect Source" and then choose "AUX"
source will change the mode to auxil-
iary device if the audio jack is con-
nected, allowing the music from your portable device to be heard through the
vehicle's speakers. To activate the AUX, plug in the audio jack.
• The functions of the portable device are controlled using the device buttons. The
volume may be controlled using the radio or portable device.
• To route the audio cable out of the center console, use the access cut out in the
front of the console.

USB Port

Connect your iPod or compatible device using a USB cable into the USB Port. USB
Memory sticks with audio files can also be used. Then, audio from the device can be
played on the vehicles sound system while providing metadata (artist, track title,
album, etc.) information on the radio display.
When connected, the iPod/compatible USB device can be controlled using the radio
or Steering Wheel Audio Controls to play, skip to the next or previous track, browse,
and list the contents.
The USB device battery charges when plugged into the USB port (if supported by the
specific device).
• To route the USB/iPod cable out of the center console, use the access cut out.
NOTE:
• When connecting your iPod device for the first time, the system may take several
minutes to read your music, depending on the number of files. For example, the
system will take approximately five minutes for every 1,000 songs loaded on the
device. Also during the reading process, the Shuffle and Browse functions will be
disabled. This process ensures the full use of your iPod features and only happens
the first time it is connected. After the first time, the reading process of your iPod
will take considerably less time unless changes are made or new songs are added
to the play list.
ELECTRONICS
USB Port And Audio Jack (AUX)
1 — USB Port
2 — AUX/Audio Jack
113

Advertisement

Table of Contents
loading

Table of Contents