Table of Contents
Advertisement
Do NOT attach any object to the touchscreen, doing so can result in damage to the
touchscreen.
Clock Setting
To start the clock setting procedure:
1. Push the MORE button on the faceplate.
2. Press the Settings button on the touchscreen, then press the "Clock and Date"
button.
3. Press the "Set Time" button on the touchscreen.
4. Press the "Up" or "Down" arrows to adjust the hours or minutes, then select the
"AM" or "PM" button on the touchscreen. You can also select 12hr or 24hr
format by pressing the desired button on the touchscreen.
5. Once the time is set press the "Done" button on the touchscreen to exit the time
screen.
NOTE:
In the Clock Setting Menu you can also select Display Clock. Display Clock turns the
clock display in the status bar on or off.
Audio Setting
1. Push the MORE button on the faceplate.
2. Press the "Settings" button on the touchscreen.
3. Scroll down and press the "Audio" button on the touchscreen to open the Audio
menu.
4. The Audio Menu shows the following options for you to customize your audio
settings.
Equalizer
Press the "Equalizer" button on the touchscreen to adjust the Bass, Mid and Treble.
Use the "+" or "-" button on the touchscreen to adjust the equalizer to your desired
settings.
Balance/Fade
Press the "Balance/Fade" button on the touchscreen to adjust the sound from the
speakers. Use the arrow buttons on the touchscreen to adjust the sound level from
the front and rear or right and left side speakers. Press the Center "C" button on the
touchscreen to reset the balance and fade to the factory setting.
ELECTRONICS
CAUTION!
95
Advertisement
Table of Contents
