Electric Park Brake System (Epb); Max Defrost; Sync; Mode Buttons - Jeep RENEGADE 2016 User Manual

Hide thumbs Also See for RENEGADE 2016:
Table of Contents

Advertisement

OPERATING YOUR VEHICLE

Max Defrost

• Push the MAX Defrost button to change the current airflow setting to Defrost
mode. Performing this function will cause the blower speed to increase to high
blower, the A/C compressor to turn ON, the driver and passenger temperatures set
to HI, rear defroster to turn ON, and recirculation to turn OFF.
• If the MAX Defrost button is toggled OFF, the climate system will return to the
previous setting.

SYNC

• Push the SYNC button to synchronize the passenger temperature setting with the
driver temperature setting.
• Changing the passenger temperature setting while in Sync will automatically exit
this feature.

Mode Buttons

The airflow distribution modes can be adjusted so air comes from the instrument
panel, floor, de-mist, and defrost outlets. One, two or all modes may be selected at
any one time.
Heated Mirrors
The mirrors are heated to melt frost or ice. This feature is activated whenever you turn
on the rear window defroster.
ELECTRIC PARK BRAKE (EPB)
Your vehicle is equipped with a new Electric Park Brake System (EPB) that offers
greater convenience. The EPB switch is located in the center console.
To apply the park brake manually, pull up
on the switch momentarily. The BRAKE
warning lamp in the instrument cluster
and an indicator on the switch will illu-
minate.
To release the park brake manually, the
ignition switch must be in RUN. Then put
your foot on the brake pedal and push the
park brake switch down momentarily.
Once the park brake is fully disengaged,
the BRAKE warning lamp and the switch
indicator will extinguish.
50
Park Brake Switch

Advertisement

Table of Contents
loading

Table of Contents