Table of Contents
Advertisement
OPERATING YOUR VEHICLE
9. Place the panel inside of the provided bag for storage in the cargo area. Repeat
the process for the Rear Panel.
NOTE:
An air deflector is available on the Jeep accessory line. This deflector may be used to
avoid the "tunnel effect" inside the vehicle, if the front panel is removed.
Installing Panel
NOTE:
Rear Panel must be installed before the front panel.
1. From outside the vehicle, place the
panel on the slides.
2. Gently slide the front panel forward, or the rear panel backwards.
3. Align the colored guide tabs to ensure
the panel(s) close properly. Front
panel is labeled with yellow guide
tabs. Rear panel is labeled with blue
guide tabs.
Installing Rear Panel
Front Guide Tabs
73
Advertisement
Table of Contents
