Toro titan Z4800 Service Manual page 54

30. Install the relay into the harness plug (Fig. 150).
Fig. 150
31. Install two wire harness clamps that secure the
wiring harness to the inside, rear of the seat box
(Fig. 151).
Fig. 151
2007 - 2008 Titan Z Service Manual
32. Pull the wire harness from inside the rear of the seat
box assembly toward the outside through the thru
hole. Install the rubber grommet into the thru hole to
protect the wire harness (Fig. 152).
IMG-0331
33. Route the PTO clutch wire through the hole in the
frame in front of the engine (Fig. 153).
IMG-0283a
CHASSIS
Fig. 152 IMG-0332a
Fig. 153 IMG-0338
3
3-41