HYDROSTATIC DRIVE SYSTEM
17. Rotate the brake shaft assembly forward and down.
Remove the e-clip retaining the brake arm to the
brake shaft assembly (Fig. 423).
18. Remove the brake arm from the machine (Fig. 424).
7
7-20
Fig. 423
IMG-0528a
Fig. 424
IMG-0529
19. Remove the cotter pin from the clevis pin that
secures the right side spring anchor plate to the
brake handle on the transmission (Fig. 425).
Fig. 425
20. Remove the right side spring anchor plate (Fig. 426).
Fig. 426
2007 - 2008 Titan Z Service Manual
IMG-0530
IMG-0531