Toro titan Z4800 Service Manual page 142

5. Install the motion control damper screw through the
left hand motion control pivot assembly. Install a nut
to secure (Fig. 406).
Fig. 406
6. Plug the wire harness plug onto the left neutral
switch (Fig. 407).
Fig. 407
2007 - 2008 Titan Z Service Manual
HYDROSTATIC DRIVE SYSTEM
7. Install two screws and washers retaining the left
IMG-0480a
8. Left Hand Motion Control Pivot: Install the left hand
IMG-0522a
hand lever grip assembly to the lever mount post
(Fig. 408).
Fig. 408
fender and fuel tank. Refer to "Left Hand Fender and
Fuel Tank Installation" on page 3-10
Right Hand Motion Control Pivot: Install the right
hand fender. Refer to "Right Hand Fender Install-
ation" on page 3-17.
IMG-0523a
7
7-15