Toro titan Z4800 Service Manual page 117

ENGINE
21. Remove the 4 bolts, washers, and nuts securing the
engine to the frame (Fig. 325).
22. Raise the engine off the frame (Fig. 326).
Note: For photo purposes the rear engine guards
and rear casting was removed.
6
23. For engine service, refer to applicable Briggs &
Stratton or Kohler service publications.
6-6
Fig. 325 IMG-0397
Fig. 326 IMG-0403a
Engine Installation
1. Position the engine onto the frame (Fig. 327).
Fig. 327
2. Install 4 engine mounting bolts, washers, and nuts to
secure the engine to the frame (Fig. 328).
Fig. 328
3. Torque the engine mounting bolts to 200 ± 25 in-lbs
(22.6 + 2.8 Nm).
2007 - 2008 Titan Z Service Manual
IMG-0405a
IMG-0406