13. Slide the brake pivot tube about half way through the
Fig. 442
14. Install a spacer on the inside end of the brake pivot
tube (Fig. 443).
Fig. 443
2007 - 2008 Titan Z Service Manual
HYDROSTATIC DRIVE SYSTEM
15. Install a washer on the inside end of the brake pivot
IMG-0314
IMG-0315a
tube (Fig. 444).
Fig. 444
bushings, spacer and washer and into the slots
located on the bell crank (Fig. 445).
Fig. 445
IMG-0316a
7
IMG-0317
7-25