Page 1
Form No. 3358-267 Rev A Titan Z4800 and Z5200 Model No. 74812-Serial No. 270000001 and Up Model No. 74814-Serial No. 270000001 and Up Original Instructions (EN) Register your product at www.Toro.com...
Loose Parts Note: Use the chart below to verify that all loose parts have been shipped. Description Qty Use Warranty Registration Form Fill out and return to Toro Key, Toro Ignition Unit ignition Key, Standard Ignition Hose, Connector Manual, Operator’s...
Page 3
2. Position the lever so the bottom hole aligns with IMPORTANT: Make sure the negative battery hole in the control arm shaft. Install spring disc cables are disconnected and the battery charger washer and bolt. used for charging the battery has an output of 16 volts and 7 amps or less to avoid damaging the 3.