Toro titan Z4800 Service Manual page 34

Seat Box Removal
1. Park the machine on a level surface, disengage
the blade control (PTO), and turn the ignition key to
"OFF" to stop the engine. Remove the ignition key.
2. Raise the seat and disconnect the negative and
positive battery cables from the battery.
3. Remove the two wing nuts securing the battery hold
down to the battery. Remove the battery hold down
and the battery from the seat box (Fig. 073).
Fig. 073
2007 - 2008 Titan Z Service Manual
4. Unplug the wiring harness connector from the seat
switch (Fig. 074).
5. Remove the wire harness from the wire clamp
located on the seat plate (Fig. 075).
IMG-0220
CHASSIS
Fig. 074 IMG-0221
Fig. 075 IMG-0223
3
3-21