3. With 3 washers installed on the electric PTO clutch
bolt, apply thread locking compound to the threads
of the clutch bolt (Fig. 289).
Fig. 289
4. Install the clutch bolt, 2 spring washers, and washer
to the crankshaft. Torque the clutch bolt to 55 ft-lbs.
(74.6 Nm).
5. Plug the harness plug into the electric PTO clutch
plug (Fig. 290).
Fig. 290
2007 - 2008 Titan Z Service Manual
6. Install the mower deck belt around the electric PTO
clutch pulley (Fig. 291).
IMG-0429a
7. Pull the idler arm assembly on the mower deck
toward the rear of the unit and route the mower deck
belt around the idler pulley (Fig. 292).
8. Install the negative battery cable to the negative
IMG-0377a
terminal on the battery.
MOWER DECK
Fig. 291
Fig. 292
IMG-0372
5
IMG-0432
5-17