Toro titan Z4800 Service Manual page 20

5. Install a nut onto the wheel axle bolt to secure the
wheel assembly to the caster fork (Fig. 021).
Fig. 021
6. Grease the wheel assembly (Fig. 022). Refer to
"Lubrication" on page 3-1.
Fig. 022
2007 - 2008 Titan Z Service Manual
Left Hand Fender & Fuel Tank
Left Hand Fender & Fuel Tank Removal
1. Park the machine on a level surface, disengage
the blade control (PTO), and turn the ignition key to
"OFF" to stop the engine. Remove the ignition key.
2. Raise the seat and disconnect the negative battery
cable from the battery.
3. Remove the two screws securing the bottom edge of
the front panel to the frame (Fig. 023).
IMG-0171
IMG-0179
CHASSIS
Fig. 023 IMG-0180a
3
3-7