HYDROSTATIC DRIVE SYSTEM
7. Remove the nut from the top of the left hand motion
control damper and move the damper out of the
motion control pivot (Fig. 390).
8. Remove the bolt and nut securing the steering rod
to the left hand motion control pivot assembly (Fig.
391).
7
7-10
Fig. 390
IMG-0480
Fig. 391
IMG-0482a
9. Remove the cotter pin located on the control pivot
pin (Fig. 392).
Fig. 392
10. Remove the control pivot pin from the motion control
pivot assembly (Fig. 393).
Fig. 393
2007 - 2008 Titan Z Service Manual
IMG-0483a
IMG-0484a