Toro titan Z4800 Service Manual page 150

5. Install the right side spring anchor plate onto the
right brake handle clevis pin. Install a cotter pin to
secure (Fig. 434).
Fig. 434
6. Install the brake arm from the brake shaft assembly
to the seat box assembly (Fig. 435).
Fig. 435
2007 - 2008 Titan Z Service Manual
HYDROSTATIC DRIVE SYSTEM
7. Install an e-clip to retain the brake arm to the brake
IMG-0539a
8. Rotate the brake shaft assembly up and slide the
IMG-0529
shaft assembly (Fig. 436).
Fig. 436
right and left spring anchor plates through the slots
in the brake shaft assembly (Fig. 437).
Fig. 437
IMG-0528a
7
IMG-0543
7-23