Changing/Clearing A Preset Delayed Transmission; Transmitting A Document From Memory - Olivetti OFX 550 Instructions Manual

CHANGING/CLEARING A PRESET DELAYED
TRANSMISSION...
Procedure
1 Make sure that you
have set a delayed
transmission.
2 Press the FUNCTION
key until the display
shows --->
3 Press the START key.
4 Press the START key.
If you want to clear the transmission you have
set previously, press the > key : the display shows
the message "CANCEL SETTING?",
then press START to confirm deletion.
The fax machine automatically returns to the initial
waiting condition. If you wish to change the time of the
transmission or the number of the recipient you wish
to send the document to, follow the steps below.
5 Press the START key.
If you wish to restore current time, press the CLEAR
key, the START key, and follow the steps below.
6 Overwrite the new time,
then confirm the setting
with the START key or
confirm the existing
time by directly
pressing the START
key.
7 Overwrite the new
number and confirm the
setting with the START
key or confirm the
existing one by directly
pressing the START
key. The fax machine
automatically returns to
the initial waiting mode.
18
-3-13-31.p65
DISPLAY
AUTOMATIC RX
TX AT 17:00
DELAYED TX
ALREADY ENTERED
CHANGE PARAM.?
TYPE TIME
HH:MM
TYPE NUMBER
06 3361551
AUTOMATIC RX
TX AT 18:00
18
TRANSMITTING A DOCUMENT FROM
MEMORY ...
The fax machine has a memory which allows you to
send documents at a preset time (delayed transmis-
sion) and to transmit a document to several remote
parties (max. 10): broadcasting transmission.
The fax machine will only allow you to memorise
one transmission at a time.
Procedure
1 Make sure that the
display shows the initial
waiting mode with date
and time.
2 Insert the document in
ADF.
3 Select the contrast and
resolution type you
consider most
appropriate.
4 Press the FUNCTION
key.
5 Press the START key.
The fax machine starts
storing the document.
When the storage is
finished, the message
"DOC. N. XXXX" is
displayed for a few
seconds and then --->
6 Enter the transmission
time, then press the
START key or press
immediately the START
key to confirm the time
displayed.
7 Dial the number of the
remote party using any
one of the dialling
procedures then press
the START key. The
fax machine asks you
to enter another
number.
If you want to send the document to several remote
parties, repeat step 7 as many times as necessary,
then press the START key to end the procedure.
If you want to send the document to one remote party
only, press the START key directly without entering
other numbers.
02/04/01, 9.18
DISPLAY
AUTOMATIC RX
22-03-99 15:10
DOCUMENT READY
ê
NORMAL
TX FROM MEMORY
TYPE TIME
HH:MM
TYPE FAX NUMBER
NUM/
TYPE FAX NUMBER
NUM/