Setup; Checking The Fluid Levels - Toro Workman HD 07369 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
Media and Additional Parts
Description
Operator's Manual (Machine)
Parts Catalog
Operator Training Material
Note: Determine the left and right side of the machine from the normal operating position.
1

Checking the Fluid Levels

No Parts Required
Procedure
1. Check the engine-oil level before and after the engine
is first started; refer to Checking the Engine Oil Level
(page 17).
2. Check the transaxle/hydraulic-fluid level before
the engine is first started; refer to Checking the
Transaxle/Hydraulic Fluid Level (page 19).
3. Check the brake-fluid level before the engine is first
started; refer to Checking the Brake-fluid Level (page
20).
Description
No parts required
Qty.
–
Qty.
1 Read before operating machine
1 Use to reference part numbers
1 View before operating machine
12
Use
Check the engine oil, the
transaxle/hydraulic fluid, and the
brake fluid levels.
Use