Safety And Instructional Decals - Toro Workman HD 07369 Operator's Manual

If the box must be in raised position, secure it with the
safety support.
•
To make sure the entire machine is in good condition,
keep all nuts, bolts, and screws properly tightened.
•
To reduce the potential fire hazard, keep the engine area
free of excessive grease, grass, leaves, and accumulation
of dirt.
•
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the engine and any moving parts.
Keep everyone away.
•
Do not overspeed the engine by changing the governor
settings. The maximum engine speed is 3650 RPM. To
ensure safety and accuracy, have an Authorized Toro
Distributor check the maximum engine speed with a
tachometer.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Do not repair or revise—read the Operator's Manual.
1. Warning—read the Operator's Manual.
1. Crushing hazard of hand—read the Operator's Manual.
93-9850
93–9868
•
If major repairs are ever needed or assistance is required,
contact an Authorized Toro Distributor.
•
To be sure of optimum performance and safety, always
purchase genuine Toro replacement parts and accessories.
Replacement parts and accessories made by other
manufacturers could be dangerous. Altering this machine
in any manner may affect the machine's operation,
performance, durability or its use may result in injury or
death. Such use could void the product warranty of The
Toro® Company.
•
This machine should not be modified without The
Toro® Company's authorization. Direct any inquiries
to The Toro® Company, Commercial Division, Vehicle
Engineering Dept., 8111 Lyndale Ave. So., Bloomington,
Minnesota 55420–1196. USA
93-9852
2. Crushing hazard—install the cylinder lock.
1. Stored energy hazard—read the Operator's Manual.
6
93-9879