Attachments/Accessories; Operation; Operating The Cargo Box - Toro Workman HD 07369 Operator's Manual

Utility vehicle with bed
Hide thumbs Also See for Workman HD 07369:
Table of Contents

Advertisement

Dimensions (cont'd.)
Overall Width
160 cm (63 inches)
w/o bed: 326 cm (128.25 inches)
w/full bed: 331 cm (130.38 inches)
Overall Length
w/2/3 bed in rear mounting location:
346 cm (136.38 inches)
Base Weight (Dry)
838 kg (1848 lb)
Rated Capacity
1361.6 kg (3002 lb) (includes 91
kg (200 lb) operator, 91 kg (200 lb)
passenger, and loaded attachment).
Maximum. Gross
2359 kg (5,200 lb)
Vehicle Weight
Tow Capacity
Tongue weight 272 kg (600 lb)
Maximum trailer weight 1587 kg
(3,500 lb)
Ground Clearance
18 cm (7 inches) w/ no load
Wheel Base
118 cm (70 inches)
Wheel Tread (center
Front: 117 cm (46 inches)
line to center line)
Rear: 121 cm (47.7 inches)
Height
190.5 cm (75 inches) to top of ROPS

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
CAUTION
Before servicing or making adjustments to the
machine, stop the engine, set the parking brake,
and remove the key from the switch. Remove any
load material from the bed or other attachment
before working under a raised bed. Never work
under a raised bed without positioning the safety
support on a fully extended cylinder rod.

Operating the Cargo Box

Note: Center loads in the cargo box if possible.
Note: Remove all cargo from the box before lifting the box
up to service the machine.
Raising the Cargo Box
WARNING
Driving the machine with the cargo box raised may
cause the machine to tip or roll easier. The box
structure may become damaged if you operate the
machine with the box raised.
• Only operate the machine when the cargo box
is down.
• After emptying the cargo box, lower it.
Move the lever backward to raise the cargo box (Figure 9).
1. Cargo box lever
16
Figure 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents