Table of Contents
Advertisement
Operation
Starting up the projector
1.
Make sure you have connected the projector to power correctly. See
power" on page 16
2.
Slide the lens cover open before turning on the projector.
Make sure the lens cover is always open when the projector lamp is on.
3.
Press
The POWER indicator flashes in green, and the fans start operating.
The lamp will light up and a start-up image displays on the screen while the projector
warms up. The projector doesn't respond to further commands while it is warming
up.
A Power On Ring Tone will be heard and the POWER indicator turns into solid green
when the projector is turned on.
To turn off the ring tone, see
4.
If this is the first time you turn on the projector, the setup wizard appears to guide
you through setting up the projector. If you have already done this, skip this step.
•
Use the arrow keys (
•
Use
26
Operation
for details.
to start the projector.
"Power On/Off Ring Tone" on page 51
/
to confirm the selected menu item.
/
/
) to move through the menu items.
"Connecting the
for details.
Advertisement
Table of Contents
