Submenu
Menu Settings
Source Rename
Quick Auto
Search
System Setup : Advanced menu
Submenu
Lamp Settings
HDMI Settings
54
Menu functions
Functions and Descriptions
•
Menu Type
Switches to the Basic OSD menu.
•
Menu Position
Sets the OSD menu position.
•
Menu Display Time
Sets the length of time the OSD will remain active after your last
key press.
•
Blank Reminder Message
Sets whether the reminder message is displayed by the projector
while the image is hidden.
Renames the current input source to your desired name.
On the Source Rename window, use
the desired characters for the connected source item.
When done, press
Sets whether the projector searches automatically for input
sources.
Select On to enable the projector to scan for input sources until
it acquires a signal. If the function is set to Off, the projector
selects the last used input source.
Functions and Descriptions
•
Reset Lamp Timer
Activate this function only after a new lamp is installed. When
you select Reset, a Reset Successfully message displays to
notify that the lamp time has been reset to "0".
•
Lamp Timer
Select to learn the duration (in hours) of lamp usage which is
automatically calculated by the built-in timer.
Total (equivalent) lamp hours = 1.5 x (hours used in Normal
mode) + 1 x (hours used in Economic mode)
•
HDMI Format
Select an input source type for the HDMI signal. You can also
manually select the source type. Different source types carry
different standards for the brightness level.
"HDMI Format" is only available when the HDMI signal is
selected.
/
and
to exit.
/
/
to set