Table of Contents
Advertisement
Display menu
Submenu
Aspect Ratio
Wall Color
Image Position
Overscan
Adjustment
52
Menu functions
Functions and Descriptions
The native display resolution of this projector is in a 16:9 aspect
ratio. However, you may use this function to display projected
picture in a different aspect ratio.
•
Auto
Scales a picture proportionally to fit the projector's native
resolution in its horizontal or vertical width. This makes the
most use of the screen and maintains the aspect ratio of a
picture.
•
4:3
Scales a picture so that it is displayed in the center of the screen
with a 4:3 aspect ratio.
•
16:9
Scales a picture so that it is displayed in the center of the screen
with a 16:9 aspect ratio.
•
Wide
Stretches a picture in a horizontal direction to fit the screen
width. It does not alter the height of a picture.
•
Letter Box
Scales a picture to fit the projector's native resolution in its
horizontal width and resizes the picture height to the 3/4 of the
projection width. This makes a picture greater than the screen
height. The top and bottom edges of the displayed picture are
cropped. This suits the contents which are produced in letter
box format (with black bars on the top and bottom).
Enable this function to help correct the projected picture's color
when the projection surface is not white. You may choose a
color similar to that of the projection surface from these
options: Light Yellow, Pink, Light Green, or Blue.
Displays the Image Position window. You may use the
directional arrow keys to adjust the position of the projected
picture.
The values shown on the lower position of the window change
with every key press you made.
This function is only available when the PC signal is selected.
Conceals the poor picture quality in the four edges.
The greater the value, the more portion of the picture is
concealed while the screen remains filled and geometrically
accurate. Setting 0 means the picture is 100% displayed.
Advertisement
Table of Contents
