Projector exterior view
Front/top view
Rear view
Bottom view
•
Do not block the ventilation openings. Blocking the ventilation openings can cause your
projector to overheat and may cause it to fail.
•
Make sure the lens cover is always open when the projector lamp is on.
1.
Vent (heated air exhaust)
2.
Built-in speakers
3.
Vents (cold air intake)
4.
Focus ring
5.
LED indicator
6.
TEMP (Temperature) indicator
7.
POWER button/POWER
indicator
8.
Front IR remote sensor
9.
Lens cover
10.
Projection lens
11.
USB Type-A port
- Provides power for charging
an HDMI/MHL dongle, such
as BenQ QCast (purchased
separately). See
details.
12.
Audio input jack
13.
HDMI 1/MHL input port
14.
Rear IR remote sensor
15.
Kensington anti-theft lock slot
16.
Mini-B USB port
- Used for service.
17.
RGB (PC)/Component Video
(YPbPr/YCbCr) signal input
jack
18.
SERVICE port
- Used for service.
19.
HDMI 2 input port
20.
Audio output jack
21.
AC power jack
22.
Adjuster feet
23.
HDMI 3/MICRO-B input port
- See
page 23
for details.
24.
Ceiling mount holes
page 22
for
Overview
9