Table of Contents
Advertisement
Menu
•
Information
Basic OSD menu - without input signals connected
As there's no input signal to your projector, only the submenus of Settings under Basic
OSD menu - with input signals connected are available. Menu options that are not available
will become grayed out.
To access the OSD menu, press
•
Use the arrow keys (
•
Use
•
Use
To switch from the
Menu
Language
Projector Position
Test Pattern
Auto Source
Search
Menu Type
42
Menu functions
Displays the following information about your projector.
•
Source: Displays the current signal source.
•
Picture Mode: Displays the current Picture Mode.
•
Resolution: Displays the native resolution of the input
source.
•
Color System: Displays input system format.
•
LED Usage Time: Displays the number of hours the
lamp has been used.
•
Firmware Version: Displays the firmware version of
your projector.
Some information is given only when certain input sources are
in use.
/
to confirm the selected menu item.
to save your changes and exit.
Basic
OSD menu to the
Sets the language for the On-Screen Display (OSD) menus.
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See
for details.
Enable this function to display the grid test pattern, which helps
you adjust the image size and focus so as to check if the
projected image is free of distortion.
Sets whether the projector searches automatically for input
sources. Select On to enable the projector to scan for input
sources until it acquires a signal. If the function is set to Off, the
projector selects the last used input source.
Switches to the Advanced OSD menu.
Submenus and Descriptions
.
/
/
) to move through the menu items.
Advanced
Submenus and Descriptions
page 37
OSD menu, see
"Choosing a location" on page 14
.
Advertisement
Table of Contents
