Table of Contents
Advertisement
Operation
Starting up the projector
1. Plug the power cord. Turn on the power outlet switch
(where fitted). The power indicator on the projector
lights orange after power has been applied.
2. Press
on the projector or remote control to start
the projector. The power indicator flashes green and
stays green when the projector is on.
The start up procedure takes about 10 seconds. In
the later stage of start up, a startup logo is projected.
(If necessary) Rotate the focus ring to adjust the
image clearness.
3. If this is the first time you turn on the projector, the setup wizard appears to guide you
through setting up the projector. If you have already done this, skip this step and move on
to the next step.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the
menu items.
• Use OK to confirm the selected menu item.
Step 1:
Specify Projector Position.
For more information about projector position,
see
Choosing a location on page
Step 2:
Reminder for using the supplied BenQ Android TV
remote control
22 Operation
14.
Advertisement
Table of Contents
