Connecting An Mhl Source Device - BenQ CH100 User Manual

Connecting an MHL source device

This projector supports MHL devices (MHL-enabled) through the use of HDMI input jack.
You can connect your MHL-enabled mobile device to the projector with an MHL cable to
play high-definition video with fluidity.
MHL (Mobile High-definition Link) supports uncompressed video and audio transmission
between compatible devices like mobiles phones, tablets and other portable consumer
electronics devices and transmits signal over a single cable. It provides pure digital viewing
and listening experience.
Examine your mobile device to determine if it is MHL-enabled:
• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to an MHL source device:
1. Take an MHL cable and connect the MHL end to the MHL output port of the MHL
source device.
2. Connect the HDMI end of the MHL cable to the HDMI 1/MHL input port on the
projector.
Not all mobile devices are MHL-enabled. Consult with your mobile device dealer to verify MHL
capabilities.
Connection 21