Table of Contents
Advertisement
If you intend to switch from the Basic OSD menu to the Advanced OSD menu, follow
the instructions below:
Use the arrow keys (
confirm the selected menu item.
•
When there is a video signal connected to the projector:
i. Go to the Settings menu > Menu Type and press
ii. Use
/
iii. Press
iv. Press
•
When there is NO video signal connected to the projector:
i. Go to Menu Type and press
ii. Use
/
iii. Press
iv. Press
Next time when you turn on the projector, you may access the Advanced OSD menu by
pressing
.
Below is the overview of the Advanced OSD menu.
Picture
Likewise, when you wish to switch from the Advanced OSD menu to the Basic OSD
menu, follow the instructions below:
i. Go to the System Setup : Basic menu > Menu Settings > Menu Type.
ii. Use
/
iii. Press
iv. Press
/
/
/
) to move through the menu items, and use
to select Advanced and press
to exit.
again to access the Advanced OSD menu.
to select Advanced and press
to exit.
again to access the Advanced OSD menu.
Picture Mode
User Mode Management
Brightness
Contrast
Color Enhancer
Tint
Pixel Enhancer
Color Temperature
LED Mode
Advanced...
Reset Current Picture Mode
PC / Component
to select Basic.
repeatedly until the OSD menu is closed.
to access the Basic OSD menu.
.
.
.
Graphic (sRGB)
50
50
50
50
7
Normal
to
.
Exit
Menu functions
37
Advertisement
Table of Contents
