Table of Contents
Advertisement
Connection
Connecting the power
1.
Insert one end of the supplied power cord into the AC power jack.
2.
Insert the plug of the power cord into a power outlet. The POWER indicator on the
projector lights up in orange after power has been applied.
•
Please use the supplied power cord to avoid possible dangers such as electric shock and fire.
•
Power systems and plug types may vary depending on your country/region.
Connecting video source devices
You need only connect the projector to a video source device using just one of the
connecting methods. Each video source provides different picture quality. The method you
choose most likely depends upon the availability of matching terminals on both the
projector and the video source device as described below:
Terminal name
HDMI 1/MHL
HDMI 2
HDMI 3/MICRO-B
If the selected video image is not displayed after the projector is turned on and the correct video
source has been selected, check that the video source device is turned on and operating
correctly. Also, check and confirm that the signal cables have been connected correctly.
16
Connection
Terminal appearance
PC
Picture quality
Good
Best
Advertisement
Table of Contents
