Table of Contents
Advertisement
Connecting a computer
The projector provides a VGA (D-Sub) input socket that allows you to connect it to both
®
IBM
compatibles and Macintosh
connecting legacy version Macintosh computers.
To connect the projector to a notebook or desktop computer:
•
Using a VGA cable
1.
Take the supplied VGA cable and connect one end to the D-Sub output socket of the
computer.
2.
Connect the other end of the VGA cable to the PC socket on the projector.
3.
If you wish to make use of the projector's built-in speakers, take a suitable audio cable
and connect one end of the cable to the audio output socket of the computer, and the
other end to the audio input socket on the projector.
Many notebooks do not turn on their external video ports when connected to a projector.
Usually a key combination like FN + F3 or CRT/LCD key turns the external display on/off. Locate
a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press
FN and the labeled function key simultaneously. Refer to your notebook's documentation to find
your notebook's key combination.
18
Connection
®
computers. A Mac adapter is needed if you are
VGA cable
Audio cable
Notebook or desktop computer
Advertisement
Table of Contents
