Operation; Starting Up The Projector - BenQ X500I User Manual

Operation

Starting up the projector

1. Plug the power cord. Turn on the power outlet
switch (where fitted). The power indicator on the
projector lights orange after power has been
applied.
2. Press on the projector or remote control to
start the projector. The power indicator flashes
green and stays green when the projector is on.
The start up procedure takes about 15 seconds.
In the later stage of starting up, a start-up logo is
projected.
(If necessary) Rotate the focus ring to adjust the image clearness.
3. If this is the first time you turn on the projector, the setup wizard appears to guide you
through setting up the projector. If you have already done this, skip this step and move on
to the next step.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the
menu items.
• Use OK to confirm the selected menu item.
Step 1:
Specify Projector Position.
For more information about projector position,
see Choosing a location on page
Step 2:
Reminder for using the supplied BenQ Android TV
remote control
20 Operation
14.