Maintenance; Sound Power Level; Sound Pressure Level; Vibration Level - Toro 07362 Operator's Manual

– Remove key from ignition.

Maintenance

• Before servicing or making adjustments to the
machine, stop engine, set parking brake and remove
key from ignition to prevent accidental starting of
the engine.
• Never work under a raised bed without placing bed
safety support on fully extended cylinder rod.
• Make sure all hydraulic line connectors are tight, and
all hydraulic hoses and lines are in good condition
before applying pressure to the system.
• Keep body and hands away from pin hole leaks or
nozzles that eject hydraulic fluid under high pressure.
Use paper or cardboard, not hands, to search for
leaks. Hydraulic fluid escaping under pressure can
have sufficient force to penetrate skin and do serious
damage. If fluid is injected into the skin it must be
surgically removed within a few hours by a doctor
familiar with this form of injury or gangrene may
result.
• Before disconnecting or performing any work on
the hydraulic system, all pressure in system must
be relieved by stopping engine, cycling dump
valve from raise to lower and/or lowering box and
attachments. Place the remote hydraulics lever in
the float position. If box must be in raised position,
secure with safety support.
• To make sure entire machine is in good condition,
keep all nuts, bolts and screws properly tightened.
• To reduce potential fire hazard, keep the engine
area free of excessive grease, grass, leaves and
accumulation of dirt.
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the engine and
any moving parts. Keep everyone away.
• Do not overspeed engine by changing governor
settings. Maximum engine speed is 3650 rpm. To
assure safety and accuracy, have an Authorized
TORO Distributor check maximum engine speed
with a tachometer.
• If major repairs are ever needed or assistance is
required, contact an Authorized Toro Distributor.
• To be sure of optimum performance and safety,
always purchase genuine TORO replacement parts
and accessories. Replacement parts and accessories
made by other manufacturers could be dangerous.
Altering this vehicle in any manner may affect the
vehicle's operation, performance, durability or its use
may result in injury or death. Such use could void
the product warranty of The TORO Company.
• This vehicle should not be modified without the
TORO Company's authorization. Direct any
inquiries to The TORO Company, Commercial
Division, Vehicle Engineering Dept., 8111 Lyndale
Ave. So., Bloomington, Minnesota 55420–1196.
USA

Sound Power Level

This unit has a guaranteed sound power level of
100 dBA/1 pW, based on measurements of identical
machines per Directive 2000/14/EC and amendments.

Sound Pressure Level

This unit has an equivalent continuous A-weighted
sound pressure at the operator ear of: 88 dB(A), based
on measurements of identical machines per Directive
98/37/EC and amendments.

Vibration Level

Hand-Arm
This unit does not exceed a vibration level of 2.5 m/s2 at
the hands based on measurements of identical machines
per ISO 5349 procedures.
Whole Body
This unit does not exceed a vibration level of 0.5 m/s2
at the posterior, based on measurements of identical
machines per ISO 2631 procedures.
7