Available Options - Kyocera Mita Ecosys FS-1800+ Operation Manual

Available Options

D.1 Available Options
Printer
4
EF-60
Envelope
Feeder
Printer combined with options
1
SO-60
Sorter
2
PT-4/PT-60
Face-up
Output Tray
3
Network
Interface Card
(3.3 V DC)
5
DU-60
Duplexer
Other Options
•
6
PF-60
Paper Feeder
•
•
•
D-2
SO-60 Sorter
Equipped with five trays each with 200 sheets capacity.
1
Performs sorting, collating, and mailbox functions. Attaches
to the top of the printer.
PT-4/PT-60 Face-up Output Tray
2
This is a face-up tray. It attaches to the rear of the printer.
Network Interface Card
3
Enables printing from multiple computers via a network.
EF-60 Envelope Feeder
Holds more envelopes at a time than the MP tray. It can be
4
attached to the front of the printer after the MP tray has been
removed.
DU-60 Duplexer
5
Performs duplex printing for short edge and long edge
binding. Attaches to the bottom of the printer.
PF-60 Paper Feeder
Holds approximately 500 sheets of A5 to A4/Letter and Legal
6
size paper. Up to three paper feeders can be attached to the
bottom of the printer.
Microdrive (Hard Disk Unit)
Enables the electronic sorting and job retention functions. To
be inserted into the slot designed for it on the main circuit
board of the printer. See your dealer for purchasing
information regarding the Microdrives that are best suited
for use with this printer.
CompactFlash Card
This is a microchip card that may contain option fonts,
macros, and forms. Insert the card into the card slot located
near the handle on the right of the printer. See your dealer for
purchasing information regarding the CompactFlash Cards
that are best suited for use with this printer.
Paper Cassette (PC-60LG)
Holds A5 to A4/Letter and Legal size paper.
Memory DIMM
See your dealer for purchasing information of the DIMM that
are best suited for use with this printer. See
the installation procedure.
Appendix B for