Latch-Type (Isofix) Child Seat Attachment - Mercedes-Benz E-Class Operator's Manual

Hide thumbs Also See for E-Class:
Table of Contents

Advertisement

48
Occupant safety
It is therefore not possible to engage the seat
belt again.
Pull over and stop the vehicle safely as
#
soon as possible, paying attention to
road and traffic conditions.
Activate the child seat safety feature
#
again and correctly secure the child
restraint system.
When enabled, the special seatbelt retractor
ensures that the seat belts of the rear seats do
not slacken once the child restraint system is
secured.
Always comply with the manufacturer's installa‐
tion instructions when installing and removing
the child restraint system.
Activating the child seat safety feature:
Pull the seat belt out fully and let the inertia
#
reel retract it again.
When the child seat safety feature is activa‐
ted,you should hear a ratcheting sound.
Push the child restraint system down until
#
the seat belt sits tightly.
Deactivating the child seat safety feature:
Press the release button of the seat belt
#
buckle.
Hold the seat belt tongue and guide back to
#
the seat belt outlet.

LATCH-type (ISOFIX) child seat attachment

Notes on LATCH-type (ISOFIX) child seat
attachments
& WARNING Risk of injury when using the
LATCH-type (ISOFIX) child restraint sys‐
tem and exceeding the permissible
weight
LATCH-type (ISOFIX) child restraint systems
do not offer sufficient protection for children
weighing more than 49 lb (22 kg) who are
secured using the seat belt integrated in the
child restraint system.
For example, the child may not be restrained
correctly in the event of an accident. This
poses an increased risk of injury or even
fatal injury.
If the child weighs more than 49 lb
#
(22 kg), only use LATCH-type (ISOFIX)
child restraint systems with which the
child is secured using the seat belt of
the vehicle seat.
Also secure the child restraint system
#
with the Top Tether belt, if available.
When installing a child restraint system, be sure
to observe the manufacturer's installation
instructions and the instructions for correct use
of the child restraint system.
LATCH-type (ISOFIX) is a standardized securing
system for special restraint systems. LATCH-type
(ISOFIX) child restraint systems are approved in
accordance with ECE R-44.
Only child restraint systems that have been
approved in accordance with ECE R-44 may be
attached to LATCH-type (ISOFIX) mounting
brackets.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents