Mercedes-Benz E-Class Operator's Manual page 97

Hide thumbs Also See for E-Class:
Table of Contents

Advertisement

thrown around; this could result in vehicle
occupants being hit.
This also applies to:
Luggage or loads
R
Seats that have been removed and are
R
transported in the vehicle as an excep‐
tion.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction.
Always stow objects in such a way that
#
they cannot be thrown around.
Before the journey, secure objects, lug‐
#
gage or loads against slipping or tipping
over.
If a seat has been removed, preferably
#
stow the seat outside of the vehicle.
& WARNING Risk of injury from incorrectly
stowed objects
If objects in the vehicle interior are stowed
incorrectly, they can slide or be thrown
around and hit vehicle occupants. In addi‐
tion, cup holders, open stowage spaces and
mobile phone brackets cannot always retain
all objects they contain.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction.
Always stow objects so that they can‐
#
not be thrown around in such situa‐
tions.
Always make sure that objects do not
#
protrude from stowage spaces, luggage
nets or stowage nets.
Close the lockable stowage spaces
#
before starting a journey.
Always stow and secure heavy, hard,
#
pointed, sharp-edged, fragile or bulky
objects in the trunk.
Seats and stowing
& WARNING Risk of burns from tailpipes
and tailpipe trim
The tailpipe and tailpipe trim can become
very hot. If you come into contact with these
parts of the vehicle, you could burn yourself.
Always be particularly careful around
#
the tailpipe and the tailpipe trim.
Allow the vehicle parts to cool down
#
before you touch them.
The handling characteristics of your vehicle are
dependent on the distribution of the load within
the vehicle. You should bear the following in
mind when loading the vehicle:
Never exceed the maximum permissible
R
gross mass or the permissible axle loads for
the vehicle (including occupants). The values
are specified on the vehicle identification
plate on the vehicle's B-pillar.
The load must not protrude above the upper
R
edge of the seat backrests.
Always place the load behind unoccupied
R
seats if possible.
95

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents