Child Seat Anchors – Latch-Type - Mercedes-Benz 2008 CL 550 4MATIC Operator's Manual

Safety and security
Occupant safety
Installation of infant and child restraint
systems
G Observe Safety notes, see
page 59.
This vehicle is equipped with tether
anchorages for a top tether strap at each of
the rear seating positions.
Top tether straps enable an additional
connection to be made between child
restraint systems secured with LATCH-type
anchors and rear seats. This can further
reduce the risk of injury.
Anchorage ring cover
1
62
More user manuals on
X
Remove anchorage ring cover
anchorage ring of the seat on which a child
seat is to be installed.
X
Store anchorage ring cover
convenient place (e.g. glove box).
Anchorage ring
2
Hook
3
Top tether strap
4
X
Guide top tether strap
head restraint and top of the seat backrest.
The head restraint must be positioned such
that top tether strap
between the head restraint and top of the
seat backrest.
X
Make sure top tether strap
twisted.
ManualsBase.com
X
from the Securely fasten hook 3, which is part of
1
top tether strap 4, to anchorage ring 2.
X
For safety, make sure hook
in a
1 to anchorage ring
catch, as illustrated.
Once hook
itself can be secured.
X
Install the child restraint system and
tighten top tether strap
child restraint manufacturer's instructions.
After removing the child restraint system and
top tether strap 4.
X
Reinstall anchorage ring cover 1.
Child seat anchors – LATCH-type
G Observe Safety notes, see
This vehicle is equipped with two LATCH-type
between the
4
anchors (at each of the rear seats) for the
installation of a LATCH-type child seat with
matching mounting fittings.
can pass freely
4
G Warning!
Children too big for a toddler restraint must
ride in seats using regular seat belts.
is not
4
is attached
3
beyond the safety
2
is attached, the child restraint
3
according to the
4
page 59.