Vehicles with automatic transmission:
R
The transmission is in position h, k or i.
Activating the HOLD function
Depress the brake pedal and after a short
#
time depress further until the ë display
appears in the multifunction display.
Release the brake pedal.
#
Deactivating the HOLD function
Depress the accelerator pedal to pull away.
#
or
Depress the brake pedal until the ë dis‐
#
play disappears from the multifunction dis‐
play.
In the following situations, the vehicle is held by
the transmission position j or by the electric
parking brake:
When the seat belt is unfastened and the
R
driver's door is opened.
When the engine is switched off.
R
When there is a malfunction in the system or
R
if the power supply is insufficient.
Adaptive Damping System
The suspension with adaptive damping adjust‐
ment has the following features:
Variable damping characteristics
R
Continuous damper tuning
R
The damping characteristics adapt to the current
operating and driving situation.
The damping is tuned individually for each wheel
and is affected by the following factors:
Your driving style, e.g. sporty
R
The road surface conditions
R
The drive program selected
R
Vehicle load
R
Driving and parking 169
The drive program can be adjusted using the
DYNAMIC SELECT switch.
AIR BODY CONTROL
AIR BODY CONTROL function
AIR BODY CONTROL comprises:
Air suspension with variable spring rate
R
Automatic level control system
R
Speed-dependent lowering to reduce fuel
R
consumption
Manual level adjustment
R
ADS PLUS (Adaptive Damping System with
R
constant damping force adjustment)
DYNAMIC SELECT switch and level button
R