Digitizer - Toshiba Satellite R10 Maintenance Manual

4.28 Digitizer

4.28 Digitizer
Caution: Read following instructions before handling the Digitizer.
Do not carry the LCD module by holding the FL cable in one's hand because it may
result to cut the FL cable, and cause display function failure or lighting failure.
Be careful to use the bezel guide.
There is a portion where the bezel is sticking out because of the digitizer guide. Do not
press and rub the portion with bare hands or it may result cut your finger.
Do not make any scratches on the B/L and TAB by the edge of the digitizer when
installing the digitizer because it may result to break the TAB or make scratches on the
B/L and cause display function failure.
4-58
4 Replacement Procedures
Satellite R10 Maintenance Manual (960-509)