Toshiba Satellite R10 Maintenance Manual page 214

3.32 SETUP
(c) Network Boot Protocol
Use this option to set the starting method via a network.
PXE Sets to PXE protocol. (Default)
RPL Sets to RPL protocol.
6. Others
Whether or not you need to configure the computer with these options depends
primarily on the kind of software or peripherals you use.
(a) Power-up Mode
Use this option to choose between resume and boot mode.
Boot
Resume
(b) CPU Cache
Use this option to enable or disable the CPU cache.
Enabled
Disabled
(c) Level 2 Cache
Use this option to enable or disable the level 2 cache. When "CPU Cache" is
set to "Disabled", this option cannot be changed.
Enabled
Disabled
(d) Dynamic CPU Frequency mode
Use this option to choose a setting from the followings. When the CPU of the
computer is Celeron-M, this option is not displayed.
Dynamically Switchable
Always High
3-100
Turns on boot mode. (Default)
Turns on resume mode.
Enables the CPU cache. (Default)
Disables the CPU cache.
Enables the level 2 cache. (Default)
Disables the level 2 cache.
Enables Pentium-M processor featuring Intel SpeedStep
technology. (Default)
Disables Pentium-M processor featuring Intel
SpeedStep technology and always runs the processor at
its maximum speed.
Satellite R10 Maintenance Manual (960-504)
3 Tests and Diagnostics