Toshiba Satellite R10 Maintenance Manual page 244

4.6 Selectable bay module
Installing a selectable bay module
The following describes the procedure for installing a selectable bay module. (See Figure
4-7 and 4-8.)
1. Install the plastic frame to the selectable bay module and secure them with
following screws.
M2.0x3.0S
2. Install the OD board and plastic brace to the selectable bay module and secure
them with following screws.
M2.0x8.0S
3. Insert a selectable bay module into the selectable bay of the computer.
4. Turn the following screw (if you want to lock the selectable bay) from unlock
position to lock position.
M2.5x4.0B
4-18
S-THIN FLAT BIND screw
BIND screw
FLAT BIND screw
4 Replacement Procedures
x5
x2
x1
Satellite R10 Maintenance Manual (960-509)