Toshiba Satellite R10 Maintenance Manual page 218

3.32 SETUP
10. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS
11. Display
This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD+AnalogRGB
System LCD only
NOTE: When starting the computer in Standby or Hibernation, the last configuration is
saved. If data does not appear on the display you are using after starting in
Standby or Hibernation, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal
LCD, the external CRT, both the internal LCD and the external CRT.
When an external CRT display, which does not support SVGA mode is connected
and "LCD+AnalogRGB" is selected, the external display is not displayed.
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled
Disabled
(c) TV type
This option allows you to select the type of TV.
NTSC (Japan)
NTSC (US)
PAL
3-104
= IRQ10, IRQ11
Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
Selects both the internal LCD and the external CRT for
simultaneous display.
Selects only internal LCD display.
Enables the LCD display stretch feature. (Default)
Disables the LCD display stretch feature.
; TV in Japanese system
; TV in the U.S. system
; TV in Europe etc. system
3 Tests and Diagnostics
Satellite R10 Maintenance Manual (960-504)