Selectable Bay Lock - Toshiba Satellite R10 Maintenance Manual

4.9 Battery latch assembly / Selectable bay lock

4.9.2 Selectable bay lock

Removing the selectable bay lock
The following describes the procedure for removing the selectable bay lock. (See Figure
4-13.)
1. Release the tabs (2 points) and detach the selectable bay lock.
2. Remove the selectable bay lock from the bottom cover assembly.
Installing the selectable bay lock
The following describes the procedure for installing the selectable bay lock. (See Figure
4-13.)
1. Hook the tabs (2 points) and install the selectable bay lock to the bottom cover
assembly.
Caution: Selectable bay lock has different shapes of tabs for each side (2 points).
Therefore, be sure to fit their shapes for installation.
4-24
tab
Figure 4-13 Removing the selectable bay lock
4 Replacement Procedures
Selectable bay lock
Satellite R10 Maintenance Manual (960-509)