Mini Pci Module - Toshiba Satellite R10 Maintenance Manual

4.12 Mini PCI module

4.12 Mini PCI module
Removing the Mini PCI module
The following describes the procedure for removing a Mini PCI module. (See Figure 4-
18.)
1. Disconnect the speaker cable from the connector CN6150 on the system board
and pull out the cable from the guide of mini PCI cover.
2. Remove the following screws securing the mini PCI cover and remove the mini
PCI cover.
M2.0x4.0Z
3. Disconnect the wireless LAN antenna cables from the connectors on the wireless
LAN card.
4. Open the left and right latches securing the wireless LAN card and remove the
wireless LAN card from the connector CN9991 of mini PCI.
4-30
BIND screw
M2.0x4.0Z BIND
Figure 4-18 Removing the Mini PCI module
4 Replacement Procedures
x1
Mini PCI cover
Speaker cable
CN6150
Wireless LAN card
Satellite R10 Maintenance Manual (960-509)