Toshiba Satellite R10 Maintenance Manual page 216

3.32 SETUP
(f) Panel Power On/Off
This option is displayed only in the resume mode.
Enabled
Disabled
(g) Standby mode
Use this option to set the start speed of operation from standby mode.
Normal
Fast
NOTE: You can not choose standby mode with the setting [Fast] when the PC is running
with battery.
7. Configuration
This option lets you set the device configuration.
All Devices
Setup by OS
NOTE: (1) When using installed OS, selecting "Setup by OS" is recommended.
(2) When executing test programs, be sure to select "ALL Device.
3-102
Enables the Panel Power On/Off.
Disables the Panel Power On/Off. (Default)
Normal speed of start to Windows operation. (Default)
Quick start to Windows operation. It consumption more
electricity than normal mode. It lights orange during
standby mode.
BIOS sets all devices.
Initializes devices, which is needed to load an operating
system. Operating system initializes other devices.
3 Tests and Diagnostics
Satellite R10 Maintenance Manual (960-504)