Cpu - Toshiba Satellite R10 Maintenance Manual

4 Replacement Procedures

4.13.2 CPU

Removing the CPU
The following describes the procedure for removing the CPU. (See Figure 4-20 and 4-
21.)
1. Remove the following screws securing the CPU hold plate in the reverse order of
the number (3→1) on the CPU hold plate and remove the CPU hold plate.
M2.0x4.0B
2. Remove the heat sink on the CPU.
M2.0x4.0B BIND
CPU hold plate
Heat sink
3. Unlock the CPU by rotating counterclockwise the cam on the CPU socket by 90
degrees with a flat-blade driver.
4. Remove the CPU.
Satellite R10 Maintenance Manual (960-509)
BIND screw
Figure 4-20 Removing the heat sink
Figure 4-21 Removing the CPU
x3
M2.0x4.0B BIND
4.13 Fan / CPU
4-33