10-3] Ddi / Did Table - Panasonic KX-TDA100 Pc Programming Manual

2.17 [10] CO & Incoming Call

2.17.3 [10-3] DDI / DID Table

Incoming trunk calls with DDI/DID numbers can be distributed to specific destinations. Each DDI/DID
number has a destination programmed for each time mode (day/lunch/break/night).
When CLI distribution is enabled for a DDI/DID number, incoming trunk calls with that DDI/DID
number will be distributed to the CLI destinations (instead of the DDI/DID destinations) if the caller's
identification number is found in the System Speed Dialling Table, which is used as the Caller ID
Table. CLI distribution can be enabled or disabled for each time mode (day/lunch/break/night) on a
DDI/DID number basis.
A maximum of 1000 DDI/DID numbers can be programmed with other related parameters. 100
numbers are displayed at a time. To display other sets of numbers, click the applicable tab.
To assign DDI/DID destination numbers, enter directly or click Destination Setting (see 2.1.6
Extension Number Setting). It is possible to programme DDI/DID numbers and DDI/DID
destinations in each time mode (day/lunch/break/night) for a set of locations in series at once by
clicking Automatic Registration, or to programme DDI/DID names for a set of locations in series at
once by clicking Name Generate.
DDI / DID Number
Specifies the DDI/DID number.
Value Range
Max. 32 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.17.3 [10-3] DDI / DID Table
Programming Manual References
2.17.4 [10-3] DDI/DID Table—Automatic Registration
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
DDI / DID Name
Specifies the name for the DDI/DID number which is shown on the extension's display when receiving
a call with the DDI/DID number. The name of the DDI/DID number can be printed out on SMDR.
Value Range
Max. 20 characters
Maintenance Console Location
2.17.3 [10-3] DDI / DID Table
Programming Manual References
2.17.5 [10-3] DDI/DID Table—Name Generate
2.18.1 [11-1] Main—SMDR Options—SMDR Options—DDI/DID Number & Name
770 PC Programming Manual