Panasonic KX-TDA100 Pc Programming Manual page 703

Programming Manual References
2.8.1 [1-1] Slot
Feature Guide References
1.17.8 Built-in Simplified Voice Message (SVM)
SVM Cyclic Tone Option—Tone Off Maximum Time
Specifies the maximum time that the PBX waits for a cyclic tone to be sent from the telephone
company before recognising it as a tone-off. When no tone is detected within the time set here, the
PBX recognises it as a tone-off.
Note that this option can only be set when SVM Cyclic Tone Detection on this screen is set to
"Option".
To apply changes to this setting, follow the steps below:
1.
Change this setting.
2.
Set the status of the SVM card (KX-TDA30) or OPB3 card (KX-TDA100/KX-TDA200/KX-
TDA600) to "OUS", then "INS".
Value Range
20 × n (n=6–200) ms
Maintenance Console Location
2.12.5 [5-3-3] Voice Message—SVM
Programming Manual References
2.8.1 [1-1] Slot
Feature Guide References
1.17.8 Built-in Simplified Voice Message (SVM)
SVM Cyclic Tone Option—Repeating Times of On/Off for Detection
Specifies the number of times the tone pattern (a set of tone-on and tone-off) must be received to
establish reception of the cyclic tone. This determines the end of call.
Note that this option can only be set when SVM Cyclic Tone Detection on this screen is set to
"Option".
Value Range
3–16
Maintenance Console Location
2.12.5 [5-3-3] Voice Message—SVM
Programming Manual References
None
Feature Guide References
1.17.8 Built-in Simplified Voice Message (SVM)
2.12 [5] Optional Device
PC Programming Manual 703