Panasonic KX-TDA100 Pc Programming Manual page 476

2.10 [3] Group
Added Number
Specifies the number to be added to the incoming caller's number in the place of the removed digits.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.10.3 [3-1-3] Caller ID Modification
Programming Manual References
2.10.1 [3-1-1] Trunk Group—TRG Settings—Caller-ID Modification Table
2.13.1 [6-1] System Speed Dial
Feature Guide References
1.18.1 Caller ID
ISDN CLIP Modification
When incoming caller information is sent through an ISDN line and the type of the network numbering
plan is International, National, or Subscriber, the caller's number can be modified as programmed in
the Modification Tables assigned to the trunk group. The modified number will then be recorded, and
it is used for sending to the network as a CLIP number.
A maximum of 4 ISDN CLIP Modification Tables can be programmed. Select the desired table from
the Modification Table list.
Removed Number of Digits
Specifies the number of leading digits to be removed from the incoming caller's number for each type
of network numbering plan.
Value Range
0–9
Maintenance Console Location
2.10.3 [3-1-3] Caller ID Modification
Programming Manual References
2.8.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Calling
Party number—Type of Number—Public, Private
2.8.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Called Party
number—Type of Number—Public, Private
Feature Guide References
1.18.1 Caller ID
Added Number
Specifies the number to be added to the incoming caller's number in the place of the removed digits
for each type of network numbering plan.
476 PC Programming Manual