Panasonic KX-TDA100 Pc Programming Manual page 120

2.8 [1] Configuration
Programming Manual References
None
Feature Guide References
None
SLT Flash Detection
Enables the PBX to detect the flash signal sent when an SLT user presses the hookswitch or the
Flash/Recall button.
Value Range
Disable: The PBX disconnects the line to prevent placing the call on hold.
Enable: The PBX places the call on consultation hold.
Maintenance Console Location
2.8.4 [1-1] Slot—Card Property - Extension Type
Programming Manual References
None
Feature Guide References
1.13.3 Call Splitting
Flash Timing - Min.
Specifies the minimum length that a signal sent from an SLT must be for the PBX to recognise it as
a hookswitch flash signal.
Value Range
8 × n (n=3–63) ms
Maintenance Console Location
2.8.4 [1-1] Slot—Card Property - Extension Type
Programming Manual References
None
Feature Guide References
None
Flash Timing - Range
Specifies the maximum length that a signal sent from an SLT can be for the PBX to recognise it as a
hookswitch flash signal.
Value Range
8 × n (n=3–191) ms
120 PC Programming Manual