Panasonic KX-TDA100 Pc Programming Manual page 308

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

2.8 [1] Configuration
Programming Manual References
2.8.37 [1-1] Slot—Card Property - IP Extension—Common Settings
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Keep Alive Time Out
Specifies the length of time that the PBX will continue to consider an IP-PT to be active even if it
receives no transmissions from that IP-PT. The PBX constantly confirms the status of IP-PTs. If no
communications are received from an IP-PT for the duration specified here, the PBX considers the
IP-PT to be unreachable, and sets the port status to Fault.
During operation, set between 10 s and 60 s. Settings over 60 s, and Disable, are used for debugging
purposes, and IP-PTs cannot be guaranteed to function normally in these circumstances. Do not use
debugging settings unless instructed to do so.
Value Range
Disable, 10–120 s
Maintenance Console Location
2.8.36 [1-1] Slot—Card Property - IP Extension
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Echo Canceller Ability
Specifies the echo canceller ability time.
Value Range
OFF, 48 ms, 128 ms
Maintenance Console Location
2.8.36 [1-1] Slot—Card Property - IP Extension
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
DSP Digital Gain (Down)
Specifies the DSP Digital Gain for the down voice path.
308
PC Programming Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda30Kx-tda200Kx-tda600

Table of Contents