1-1] Slot-Port Property - Lco Port-Connection Command - Panasonic KX-TDA100 Pc Programming Manual

2.8 [1] Configuration
2.8.12 [1-1] Slot—Port Property - LCO Port—Connection
Command
Commands for the LCO ports can be programmed.
INS
Puts the port in service.
Value Range
Not applicable.
Maintenance Console Location
2.8.12 [1-1] Slot—Port Property - LCO Port—Connection Command
Programming Manual References
2.8.11 [1-1] Slot—Port Property - LCO Port
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
2.8.12 [1-1] Slot—Port Property - LCO Port—Connection Command
Programming Manual References
2.8.11 [1-1] Slot—Port Property - LCO Port
Feature Guide References
None
154 PC Programming Manual